Astable 555 Square Wave Calculator
This calculator requires the use of Javascript
enabled and capable browsers. This calculator is designed to give
timing values for the 555 timer, based on the control capacitance
and resistance. This particular configuration is for an astable
square wave calculation. The positive output is high for T(h)
seconds based on this formula:
Time High (secs) = 0.693 * (R1 + R2) * C
The negative output is low for T(l) seconds based on this formula:
Time Low (secs) = 0.693 * R2 * C
The frequency is derived by the formula:
Frequency = 1.44 / ((R1 + R2 + R2) * C)
The duty cycle percentage is the relationship of the high time to
the overall cycle time and is derived by the formula:
DCP = (T(h) / (T(h) + T(l))) * 100
Where resistance is in ohms and capacitance is in farads. Enter the
capacitance in farads (not microfarads) and the resistance in ohms
for each resistor. Click on Calculate to return the time high in
seconds, the time low in seconds, the duty cycle percentage and the
frequency in hertz. You might also wish to see our Monostable 555
Timeout Calculator.

